基于改进粒子群算法的自动机性能评估

由于自行高炮自动机状态监测中缺乏行之有效的机构性能评估手段,引入了改进粒子群算法。建立了自动机动力学模型,对后坐过程进行了动力学仿真,确定了反映机构性能的浮动曲线特征量。针对粒子群算法收敛速度慢、精度低等缺陷,对其进行改进,并结合曲线特征量对自动机性能参数进行了评估。结果表明:改进后粒子群算法的算法收敛性和结果精度都有明显的改善,有效实现了自动机的性能参数评估。     

Fully sequential procedures for comparing constrained systems via simulation

We consider the problem of finding the system with the best primary performance measure among a finite number of simulated systems in the presence of a stochastic constraint on a single real‐valued secondary performance measure. Solving this problem requires the identification and removal from consideration of infeasible systems (Phase I) and of systems whose primary performance measure is dominated by that of other feasible systems (Phase II). We use indifference zones in both phases and consider two approaches, namely, carrying out Phases I and II sequentially and carrying out Phases I and II simultaneously, and we provide specific example procedures of each type. We present theoretical results guaranteeing that our approaches (general and specific, sequential and simultaneous) yield the best system with at least a prespecified probability, and we provide a portion of an extensive numerical study aimed at evaluating and comparing the performance of our approaches. The experimental results show that both new procedures are useful for constrained ranking and selection, with neither procedure showing uniform superiority over the other.© 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

固定翼反潜巡逻机作战效能评估

运用改进的Topsis评估模型对反潜巡逻机的作战效能进行评估,主要是对指标权重的计算方法进行改进:综合考虑客观熵权和专家主观权重得到综合权重,通过客观的熵权信息来调整主观权重的偏差,使得反潜巡逻机作战效能的评价结果更为合理。实例分析表明,该方法能够主客观相结合,简单有效,具有一定的推广应用价值。     

基于计数器的处理器核性能分析与优化

随着处理器微体系结构日益复杂,性能分析在处理器研制过程中的作用越来越重要。常用的性能分析方法是建立性能模型,该方法主要用于研制初期的设计空间探索,如果用于微体系结构级的分析和优化,速度和精度都会成为限制因素。提出了一种基于计数器的性能分析方法,该方法以项目组已经完成的一款处理器核的硬件实现代码为基础,在处理器核外部添加一个专用性能监测单元,收集微体系结构分析和优化需要的各种事件,并通过结果分析器对统计的事件进行分析,得到微体系结构实现的性能受限因素。采用此方法,在FPGA原型系统上对SPEC CPU2000测试程序运行时的性能受限因素进行了分析,并根据分析结果采取了相应的优化措施,优化后的处理器核性能得到了明显提升。     

A survey of performance issues in defence innovation

This article reviews innovation processes in defence. It analyses the way and the context under which these processes are carried out. The article covers the features of defence goods with impact on innovation, the development of a new good, the institutional arrangements that support these processes and the effect of innovation on industrial market. The analysis helps to identify the causes of facts observed in practice, such as poor performance in terms of product quality, cost or delivery time, as well as to assess potential remedies. Some policy implications, which can be derived from this analysis, are finally outlined.     

柴油机热力性能的灰色预测

提出了一种基于柴油机示功图数据分析及灰色预测理论的柴油机热力性能预测方法.该方法从一系列实测示功图压力数据中还原燃烧规律,提取燃烧规律曲线的特征值,并采用灰色预测理论来预测未来的燃烧规律,代入柴油机工作过程计算程序中得到其各热力参数,具有一定的理论及实用价值.     

身管内弹道性能改变量的静态标定研究

目前国内外静态标定火炮身管内弹道性能改变量的方法,都存在着原理和精度不高的缺陷。采用多特征截面的标定方法可取得满意的精度,本文论述了其理论基础、精度及应用领域。     

Q∝T~n时不可逆卡诺热泵的最优性能

非线性传热条件下的内可逆卡诺热机最优性能有了一些讨论,本文将导出不可逆卡诺热泵工作于非线性传热 Q■条件下,最佳供热系数д与泵热率π的关系。据此可确定任意泵热率时所对应的供热系数界限。最后,讨论了这一关系的一些应用,所得结果包含了经典热力学及内可逆线性传热情况下的有关结论,为实际热泵设计提供新的理论依据。     

微波雷达目标信号模拟器及其应用

本文为在野战条件下检测雷达测距系统的性能提供一种新型微波目标信号模拟器,闸述其工作原理及功能。除在检测雷达测距系统性能上已得到实际应用外,还论述了可以进一步开发的应用项目,因为不受场地和气候条件的限制,从而获得较好的效能、效率和效益。     

内可逆卡诺热泵的生态学优化性能

本文导出了内可逆卡诺热泵的供热量、供热率和供热系数的耗散量,以反映热泵供热率π与其耗散φ_cT_Lσ,即热泵熵产率σ、低温热源温度T_L和可逆供热系数φ_c乘积之间最佳折衷的“生态学”性能E=π-φ_cT_Lσ为目标,基于牛顿和线性唯象传热定律,研究内可逆卡诺热泵的优化问题,得到最大E性能时的供热系数界限及相应的供热率和熵产率。